changes

packages/uz801-tweaks/Makefile

@@ -31,7 +31,10 @@ define Package/$(PKG_NAME)/install
 	$(INSTALL_BIN) ./files/uci_defaults $(1)/etc/uci-defaults/99-default-config
 
 	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) ./files/smart_leds $(1)/etc/init.d/smart-leds
+	$(INSTALL_BIN) ./files/smart-leds-daemon.init $(1)/etc/init.d/smart-leds-daemon
+
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_BIN) ./files/smart-leds-daemon.sh $(1)/usr/bin/smart-leds-daemon
 endef 
 
 $(eval $(call BuildPackage,$(PKG_NAME)))

packages/uz801-tweaks/files/smart-leds-daemon.init

@@ -0,0 +1,20 @@
+#!/bin/sh /etc/rc.common
+# /etc/init.d/smart-leds
+
+START=98
+STOP=02
+USE_PROCD=1
+
+start_service() {
+    procd_open_instance
+    procd_set_param command /usr/bin/smart-leds-daemon
+    procd_set_param respawn
+    procd_set_param stdout 1
+    procd_set_param stderr 1
+    procd_close_instance
+}
+
+stop_service() {
+    echo 0 > /sys/class/leds/blue:wan/brightness
+    echo 0 > /sys/class/leds/green:wlan/brightness
+}

packages/uz801-tweaks/files/smart-leds-daemon.sh

@@ -0,0 +1,20 @@
+#!/bin/sh
+# /usr/bin/smart-leds-daemon
+
+while true; do
+    # WiFi LED 
+    if ip link show phy0-ap0 2>/dev/null | grep -q "UP"; then
+        echo 1 > /sys/class/leds/blue:wan/brightness
+    else
+        echo 0 > /sys/class/leds/blue:wan/brightness
+    fi
+    
+    # 4G LED
+    if ip addr show wwan0 2>/dev/null | grep -q "inet "; then
+        echo 1 > /sys/class/leds/green:wlan/brightness
+    else
+        echo 0 > /sys/class/leds/green:wlan/brightness
+    fi
+    
+    sleep 10
+done

packages/uz801-tweaks/files/smart_leds

@@ -1,45 +0,0 @@
-#!/bin/sh /etc/rc.common
-# /etc/init.d/smart-leds
-
-START=98
-STOP=02
-
-USE_PROCD=1
-
-# On Linux sources dts, leds are crossed: 
-# - blue:wan is actually wlan
-# - green:wlan is actually wan
-# - red is always power
-
-start_service() {
-    procd_open_instance
-    procd_set_param command /bin/sh -c '
-        while true; do
-            # Wifi led if iface is up
-            if ip link show phy0-ap0 2>/dev/null | grep -q "UP"; then
-                echo 1 > /sys/class/leds/blue:wan/brightness
-            else
-                echo 0 > /sys/class/leds/blue:wan/brightness
-            fi
-            
-            # 4G led if wwan0 has ip
-            if ip addr show wwan0 2>/dev/null | grep -q "inet "; then
-                echo 1 > /sys/class/leds/green:wlan/brightness
-            else
-                echo 0 > /sys/class/leds/green:wlan/brightness
-            fi
-            
-            sleep 10
-        done
-    '
-    procd_set_param respawn
-    procd_set_param stdout 1
-    procd_set_param stderr 1
-    procd_close_instance
-}
-
-stop_service() {
-    # Apagar LEDs al parar el servicio
-    echo 0 > /sys/class/leds/blue:wan/brightness
-    echo 0 > /sys/class/leds/green:wlan/brightness
-}