Merge pull request #19 from hkfuertes/uf02_new_device

Two new devices: UF02 & M9S

.github/workflows/m9s.yml

@@ -0,0 +1,97 @@
+name: OpenWrt Builder (M9S)
+on:
+  repository_dispatch:
+  workflow_dispatch:
+
+env:
+  UPLOAD_BIN_DIR: true
+  UPLOAD_FIRMWARE: true
+  UPLOAD_RELEASE: false
+  TZ: Europe/Madrid
+
+jobs:
+  build:
+    runs-on: ubuntu-22.04
+
+    steps:
+    - name: Checkout
+      uses: actions/checkout@v4
+
+    - name: Initialization environment
+      env:
+        DEBIAN_FRONTEND: noninteractive
+      run: |
+        sudo rm -rf /etc/apt/sources.list.d/* /usr/share/dotnet /usr/local/lib/android /opt/ghc /opt/hostedtoolcache/CodeQL
+        sudo docker image prune --all --force
+        sudo -E apt-get -qq update
+        sudo -E ./devenv/dependencies.sh
+        sudo -E apt-get -qq autoremove --purge
+        sudo -E apt-get -qq clean
+        sudo timedatectl set-timezone "$TZ"
+
+    - name: "Clone OpenWrt source code"
+      run: |
+        df -hT $PWD
+        git clone --depth=1 --branch "main" https://git.openwrt.org/openwrt/openwrt.git openwrt
+
+    - name: Load msm89xx target and uz801 packages
+      run: |
+        git apply --unsafe-paths enable_wcn36xx_mac80211.patch
+        mv msm89xx openwrt/target/linux/msm89xx
+        mv packages openwrt/package/uz801
+        if [ "${{ inputs.openwrt_version }}" == "openwrt-24.10" ]; then
+          sed -i '/^KERNEL_PATCHVER/c\KERNEL_PATCHVER:=6.6' openwrt/target/linux/msm89xx/Makefile
+        fi
+
+    - name: Update and install feeds
+      run: |
+        cd openwrt
+        rm -rf tmp
+        ./scripts/feeds update -a
+        ./scripts/feeds install -a
+
+    - name: "Load diffconfig"
+      run: |
+        [ -f diffconfig_m9s ] && mv diffconfig_m9s openwrt/.config
+
+    - name: Download package
+      id: package
+      run: |
+        cd openwrt
+        make defconfig
+        make download -j8
+        find dl -size -1024c -exec ls -l {} \; || true
+        find dl -size -1024c -exec rm -f {} \; || true
+
+    - name: Compile the firmware
+      id: compile
+      run: |
+        cd openwrt
+        echo -e "$(nproc) thread compile"
+        make -j$(nproc) || make -j1 || make -j1 V=s
+        echo "status=success" >> $GITHUB_OUTPUT
+        grep '^CONFIG_TARGET.*DEVICE.*=y' .config | sed -r 's/.*DEVICE_(.*)=y/\1/' > DEVICE_NAME
+        [ -s DEVICE_NAME ] && echo "DEVICE_NAME=$(cat DEVICE_NAME)" >> $GITHUB_ENV
+        echo "FILE_DATE=$(date +"%Y%m%d%H%M")" >> $GITHUB_ENV
+
+    - name: Organize files
+      id: organize
+      if: env.UPLOAD_FIRMWARE == 'true' && !cancelled()
+      run: |
+        cd openwrt/bin/targets/*/*
+        rm -rf packages
+        echo "FIRMWARE=$PWD" >> $GITHUB_ENV
+        echo "status=success" >> $GITHUB_OUTPUT
+
+    - name: Upload firmware
+      uses: actions/upload-artifact@v4
+      if: steps.organize.outputs.status == 'success' && !cancelled()
+      with:
+        name: openwrt_firmware_${{ env.DEVICE_NAME }}_${{ env.FILE_DATE }}
+        path: |
+          ${{ env.FIRMWARE }}/openwrt-msm89xx-msm8916-yiming-uz801v3-squashfs-gpt_both0.bin
+          ${{ env.FIRMWARE }}/openwrt-msm89xx-msm8916-yiming-uz801v3-squashfs-boot.img
+          ${{ env.FIRMWARE }}/openwrt-msm89xx-msm8916-yiming-uz801v3-squashfs-system.img
+          ${{ env.FIRMWARE }}/openwrt-msm89xx-msm8916-yiming-uz801v3.manifest
+          ${{ env.FIRMWARE }}/openwrt-msm89xx-msm8916-yiming-uz801v3-flash.sh
+          ${{ env.FIRMWARE }}/openwrt-msm89xx-msm8916-yiming-uz801v3-firmware.zip

.github/workflows/uf02.yml

@@ -0,0 +1,97 @@
+name: OpenWrt Builder (UF02)
+on:
+  repository_dispatch:
+  workflow_dispatch:
+
+env:
+  UPLOAD_BIN_DIR: true
+  UPLOAD_FIRMWARE: true
+  UPLOAD_RELEASE: false
+  TZ: Europe/Madrid
+
+jobs:
+  build:
+    runs-on: ubuntu-22.04
+
+    steps:
+    - name: Checkout
+      uses: actions/checkout@v4
+
+    - name: Initialization environment
+      env:
+        DEBIAN_FRONTEND: noninteractive
+      run: |
+        sudo rm -rf /etc/apt/sources.list.d/* /usr/share/dotnet /usr/local/lib/android /opt/ghc /opt/hostedtoolcache/CodeQL
+        sudo docker image prune --all --force
+        sudo -E apt-get -qq update
+        sudo -E ./devenv/dependencies.sh
+        sudo -E apt-get -qq autoremove --purge
+        sudo -E apt-get -qq clean
+        sudo timedatectl set-timezone "$TZ"
+
+    - name: "Clone OpenWrt source code"
+      run: |
+        df -hT $PWD
+        git clone --depth=1 --branch "main" https://git.openwrt.org/openwrt/openwrt.git openwrt
+
+    - name: Load msm89xx target and uz801 packages
+      run: |
+        git apply --unsafe-paths enable_wcn36xx_mac80211.patch
+        mv msm89xx openwrt/target/linux/msm89xx
+        mv packages openwrt/package/uz801
+        if [ "${{ inputs.openwrt_version }}" == "openwrt-24.10" ]; then
+          sed -i '/^KERNEL_PATCHVER/c\KERNEL_PATCHVER:=6.6' openwrt/target/linux/msm89xx/Makefile
+        fi
+
+    - name: Update and install feeds
+      run: |
+        cd openwrt
+        rm -rf tmp
+        ./scripts/feeds update -a
+        ./scripts/feeds install -a
+
+    - name: "Load diffconfig"
+      run: |
+        [ -f diffconfig_uf02 ] && mv diffconfig_uf02 openwrt/.config
+
+    - name: Download package
+      id: package
+      run: |
+        cd openwrt
+        make defconfig
+        make download -j8
+        find dl -size -1024c -exec ls -l {} \; || true
+        find dl -size -1024c -exec rm -f {} \; || true
+
+    - name: Compile the firmware
+      id: compile
+      run: |
+        cd openwrt
+        echo -e "$(nproc) thread compile"
+        make -j$(nproc) || make -j1 || make -j1 V=s
+        echo "status=success" >> $GITHUB_OUTPUT
+        grep '^CONFIG_TARGET.*DEVICE.*=y' .config | sed -r 's/.*DEVICE_(.*)=y/\1/' > DEVICE_NAME
+        [ -s DEVICE_NAME ] && echo "DEVICE_NAME=$(cat DEVICE_NAME)" >> $GITHUB_ENV
+        echo "FILE_DATE=$(date +"%Y%m%d%H%M")" >> $GITHUB_ENV
+
+    - name: Organize files
+      id: organize
+      if: env.UPLOAD_FIRMWARE == 'true' && !cancelled()
+      run: |
+        cd openwrt/bin/targets/*/*
+        rm -rf packages
+        echo "FIRMWARE=$PWD" >> $GITHUB_ENV
+        echo "status=success" >> $GITHUB_OUTPUT
+
+    - name: Upload firmware
+      uses: actions/upload-artifact@v4
+      if: steps.organize.outputs.status == 'success' && !cancelled()
+      with:
+        name: openwrt_firmware_${{ env.DEVICE_NAME }}_${{ env.FILE_DATE }}
+        path: |
+          ${{ env.FIRMWARE }}/openwrt-msm89xx-msm8916-yiming-uz801v3-squashfs-gpt_both0.bin
+          ${{ env.FIRMWARE }}/openwrt-msm89xx-msm8916-yiming-uz801v3-squashfs-boot.img
+          ${{ env.FIRMWARE }}/openwrt-msm89xx-msm8916-yiming-uz801v3-squashfs-system.img
+          ${{ env.FIRMWARE }}/openwrt-msm89xx-msm8916-yiming-uz801v3.manifest
+          ${{ env.FIRMWARE }}/openwrt-msm89xx-msm8916-yiming-uz801v3-flash.sh
+          ${{ env.FIRMWARE }}/openwrt-msm89xx-msm8916-yiming-uz801v3-firmware.zip

diffconfig

@@ -1,7 +1,7 @@
 CONFIG_TARGET_msm89xx=y
 CONFIG_TARGET_msm89xx_msm8916=y
 CONFIG_TARGET_msm89xx_msm8916_DEVICE_yiming-uz801v3=y
-CONFIG_LIBQMI_COLLECTION_BASIC=y
+CONFIG_LIBQMI_COLLECTION_FULL=y
 CONFIG_LIBQMI_WITH_MBIM_QMUX=y
 CONFIG_LIBQMI_WITH_QRTR_GLIB=y
 CONFIG_MODEMMANAGER_WITH_MBIM=y
@@ -70,6 +70,7 @@ CONFIG_PACKAGE_modemmanager=y
 CONFIG_PACKAGE_mount-utils=y
 CONFIG_PACKAGE_mtools=y
 CONFIG_PACKAGE_nano=y
+CONFIG_PACKAGE_qmi-utils=y
 CONFIG_PACKAGE_resize2fs=y
 CONFIG_PACKAGE_resolveip=y
 CONFIG_PACKAGE_rpcd=y

diffconfig_m9s

@@ -0,0 +1,94 @@
+CONFIG_TARGET_msm89xx=y
+CONFIG_TARGET_msm89xx_msm8916=y
+CONFIG_TARGET_msm89xx_msm8916_DEVICE_generic-m9s=y
+CONFIG_BUSYBOX_CUSTOM=y
+CONFIG_BUSYBOX_CONFIG_FBSET=y
+CONFIG_BUSYBOX_CONFIG_USLEEP=y
+CONFIG_LIBQMI_COLLECTION_BASIC=y
+CONFIG_LIBQMI_WITH_MBIM_QMUX=y
+CONFIG_LIBQMI_WITH_QRTR_GLIB=y
+CONFIG_MODEMMANAGER_WITH_MBIM=y
+CONFIG_MODEMMANAGER_WITH_NETIFD=y
+CONFIG_MODEMMANAGER_WITH_QMI=y
+CONFIG_MODEMMANAGER_WITH_QRTR=y
+CONFIG_PACKAGE_bash=y
+CONFIG_PACKAGE_cgi-io=y
+CONFIG_PACKAGE_dbus=y
+CONFIG_PACKAGE_glib2=y
+CONFIG_PACKAGE_ip-tiny=y
+CONFIG_PACKAGE_kmod-crypto-kpp=y
+CONFIG_PACKAGE_kmod-crypto-lib-chacha20=y
+CONFIG_PACKAGE_kmod-crypto-lib-chacha20poly1305=y
+CONFIG_PACKAGE_kmod-crypto-lib-curve25519=y
+CONFIG_PACKAGE_kmod-crypto-lib-poly1305=y
+CONFIG_PACKAGE_kmod-tun=y
+CONFIG_PACKAGE_kmod-udptunnel4=y
+CONFIG_PACKAGE_kmod-udptunnel6=y
+CONFIG_PACKAGE_kmod-wireguard=y
+CONFIG_PACKAGE_libattr=y
+CONFIG_PACKAGE_libdbus=y
+CONFIG_PACKAGE_libexpat=y
+CONFIG_PACKAGE_libfdisk=y
+CONFIG_PACKAGE_libffi=y
+CONFIG_PACKAGE_libiwinfo=y
+CONFIG_PACKAGE_libiwinfo-data=y
+CONFIG_PACKAGE_liblua=y
+CONFIG_PACKAGE_liblucihttp=y
+CONFIG_PACKAGE_liblucihttp-lua=y
+CONFIG_PACKAGE_liblucihttp-ucode=y
+CONFIG_PACKAGE_libmbim=y
+CONFIG_PACKAGE_libmount=y
+CONFIG_PACKAGE_libncurses=y
+CONFIG_PACKAGE_libpcre2=y
+CONFIG_PACKAGE_libqmi=y
+CONFIG_PACKAGE_libqrtr-glib=y
+CONFIG_PACKAGE_libreadline=y
+CONFIG_PACKAGE_libubus-lua=y
+CONFIG_PACKAGE_lsblk=y
+CONFIG_PACKAGE_lua=y
+CONFIG_PACKAGE_luci=y
+CONFIG_PACKAGE_luci-app-firewall=y
+CONFIG_PACKAGE_luci-app-package-manager=y
+CONFIG_PACKAGE_luci-app-usb-gadget=y
+CONFIG_PACKAGE_luci-base=y
+CONFIG_PACKAGE_luci-lib-base=y
+CONFIG_PACKAGE_luci-lib-ip=y
+CONFIG_PACKAGE_luci-lib-json=y
+CONFIG_PACKAGE_luci-lib-jsonc=y
+CONFIG_PACKAGE_luci-lib-nixio=y
+CONFIG_PACKAGE_luci-lib-uqr=y
+CONFIG_PACKAGE_luci-light=y
+CONFIG_PACKAGE_luci-lua-runtime=y
+CONFIG_PACKAGE_luci-mod-admin-full=y
+CONFIG_PACKAGE_luci-mod-network=y
+CONFIG_PACKAGE_luci-mod-rpc=y
+CONFIG_PACKAGE_luci-mod-status=y
+CONFIG_PACKAGE_luci-mod-system=y
+CONFIG_PACKAGE_luci-proto-ipv6=y
+CONFIG_PACKAGE_luci-proto-modemmanager=y
+CONFIG_PACKAGE_luci-proto-ppp=y
+CONFIG_PACKAGE_luci-proto-wireguard=y
+CONFIG_PACKAGE_luci-theme-bootstrap=y
+CONFIG_PACKAGE_modemmanager=y
+CONFIG_PACKAGE_mount-utils=y
+CONFIG_PACKAGE_mtools=y
+CONFIG_PACKAGE_nano=y
+CONFIG_PACKAGE_resize2fs=y
+CONFIG_PACKAGE_resolveip=y
+CONFIG_PACKAGE_rpcd=y
+CONFIG_PACKAGE_rpcd-mod-file=y
+CONFIG_PACKAGE_rpcd-mod-iwinfo=y
+CONFIG_PACKAGE_rpcd-mod-luci=y
+CONFIG_PACKAGE_rpcd-mod-rrdns=y
+CONFIG_PACKAGE_rpcd-mod-ucode=y
+CONFIG_PACKAGE_sfdisk=y
+CONFIG_PACKAGE_terminfo=y
+CONFIG_PACKAGE_tune2fs=y
+CONFIG_PACKAGE_ucode-mod-html=y
+CONFIG_PACKAGE_ucode-mod-log=y
+CONFIG_PACKAGE_ucode-mod-lua=y
+CONFIG_PACKAGE_ucode-mod-math=y
+CONFIG_PACKAGE_uhttpd=y
+CONFIG_PACKAGE_uhttpd-mod-ubus=y
+CONFIG_PACKAGE_wireguard-tools=y
+# CONFIG_TARGET_ROOTFS_EXT4FS is not set

diffconfig_uf02

@@ -0,0 +1,95 @@
+CONFIG_TARGET_msm89xx=y
+CONFIG_TARGET_msm89xx_msm8916=y
+CONFIG_TARGET_msm89xx_msm8916_DEVICE_generic-uf02=y
+CONFIG_BUSYBOX_CUSTOM=y
+CONFIG_BUSYBOX_CONFIG_FBSET=y
+CONFIG_BUSYBOX_CONFIG_USLEEP=y
+CONFIG_LIBQMI_COLLECTION_FULL=y
+CONFIG_LIBQMI_WITH_MBIM_QMUX=y
+CONFIG_LIBQMI_WITH_QRTR_GLIB=y
+CONFIG_MODEMMANAGER_WITH_MBIM=y
+CONFIG_MODEMMANAGER_WITH_NETIFD=y
+CONFIG_MODEMMANAGER_WITH_QMI=y
+CONFIG_MODEMMANAGER_WITH_QRTR=y
+CONFIG_PACKAGE_bash=y
+CONFIG_PACKAGE_cgi-io=y
+CONFIG_PACKAGE_dbus=y
+CONFIG_PACKAGE_glib2=y
+CONFIG_PACKAGE_ip-tiny=y
+CONFIG_PACKAGE_kmod-crypto-kpp=y
+CONFIG_PACKAGE_kmod-crypto-lib-chacha20=y
+CONFIG_PACKAGE_kmod-crypto-lib-chacha20poly1305=y
+CONFIG_PACKAGE_kmod-crypto-lib-curve25519=y
+CONFIG_PACKAGE_kmod-crypto-lib-poly1305=y
+CONFIG_PACKAGE_kmod-tun=y
+CONFIG_PACKAGE_kmod-udptunnel4=y
+CONFIG_PACKAGE_kmod-udptunnel6=y
+CONFIG_PACKAGE_kmod-wireguard=y
+CONFIG_PACKAGE_libattr=y
+CONFIG_PACKAGE_libdbus=y
+CONFIG_PACKAGE_libexpat=y
+CONFIG_PACKAGE_libfdisk=y
+CONFIG_PACKAGE_libffi=y
+CONFIG_PACKAGE_libiwinfo=y
+CONFIG_PACKAGE_libiwinfo-data=y
+CONFIG_PACKAGE_liblua=y
+CONFIG_PACKAGE_liblucihttp=y
+CONFIG_PACKAGE_liblucihttp-lua=y
+CONFIG_PACKAGE_liblucihttp-ucode=y
+CONFIG_PACKAGE_libmbim=y
+CONFIG_PACKAGE_libmount=y
+CONFIG_PACKAGE_libncurses=y
+CONFIG_PACKAGE_libpcre2=y
+CONFIG_PACKAGE_libqmi=y
+CONFIG_PACKAGE_libqrtr-glib=y
+CONFIG_PACKAGE_libreadline=y
+CONFIG_PACKAGE_libubus-lua=y
+CONFIG_PACKAGE_lsblk=y
+CONFIG_PACKAGE_lua=y
+CONFIG_PACKAGE_luci=y
+CONFIG_PACKAGE_luci-app-firewall=y
+CONFIG_PACKAGE_luci-app-package-manager=y
+CONFIG_PACKAGE_luci-app-usb-gadget=y
+CONFIG_PACKAGE_luci-base=y
+CONFIG_PACKAGE_luci-lib-base=y
+CONFIG_PACKAGE_luci-lib-ip=y
+CONFIG_PACKAGE_luci-lib-json=y
+CONFIG_PACKAGE_luci-lib-jsonc=y
+CONFIG_PACKAGE_luci-lib-nixio=y
+CONFIG_PACKAGE_luci-lib-uqr=y
+CONFIG_PACKAGE_luci-light=y
+CONFIG_PACKAGE_luci-lua-runtime=y
+CONFIG_PACKAGE_luci-mod-admin-full=y
+CONFIG_PACKAGE_luci-mod-network=y
+CONFIG_PACKAGE_luci-mod-rpc=y
+CONFIG_PACKAGE_luci-mod-status=y
+CONFIG_PACKAGE_luci-mod-system=y
+CONFIG_PACKAGE_luci-proto-ipv6=y
+CONFIG_PACKAGE_luci-proto-modemmanager=y
+CONFIG_PACKAGE_luci-proto-ppp=y
+CONFIG_PACKAGE_luci-proto-wireguard=y
+CONFIG_PACKAGE_luci-theme-bootstrap=y
+CONFIG_PACKAGE_modemmanager=y
+CONFIG_PACKAGE_mount-utils=y
+CONFIG_PACKAGE_mtools=y
+CONFIG_PACKAGE_nano=y
+CONFIG_PACKAGE_qmi-utils=y
+CONFIG_PACKAGE_resize2fs=y
+CONFIG_PACKAGE_resolveip=y
+CONFIG_PACKAGE_rpcd=y
+CONFIG_PACKAGE_rpcd-mod-file=y
+CONFIG_PACKAGE_rpcd-mod-iwinfo=y
+CONFIG_PACKAGE_rpcd-mod-luci=y
+CONFIG_PACKAGE_rpcd-mod-rrdns=y
+CONFIG_PACKAGE_rpcd-mod-ucode=y
+CONFIG_PACKAGE_sfdisk=y
+CONFIG_PACKAGE_terminfo=y
+CONFIG_PACKAGE_tune2fs=y
+CONFIG_PACKAGE_ucode-mod-html=y
+CONFIG_PACKAGE_ucode-mod-log=y
+CONFIG_PACKAGE_ucode-mod-lua=y
+CONFIG_PACKAGE_ucode-mod-math=y
+CONFIG_PACKAGE_uhttpd=y
+CONFIG_PACKAGE_uhttpd-mod-ubus=y
+CONFIG_PACKAGE_wireguard-tools=y
+# CONFIG_TARGET_ROOTFS_EXT4FS is not set

msm89xx/image/msm8916.mk

@@ -33,22 +33,45 @@ define Device/yiming-uz801v3
   DEVICE_VENDOR := YiMing
   DEVICE_MODEL := uz801v3
   FILESYSTEMS := squashfs
-  DEVICE_PACKAGES := configs-uz801 wpad-basic-wolfssl rmtfs uci-usb-gadget \
+  DEVICE_PACKAGES := configs-dongle wpad-basic-wolfssl rmtfs uci-usb-gadget \
                      block-mount f2fs-tools prepare-rootfs-data \
-                     msm-firmware-dumper ledcontrol
+                     msm-firmware-dumper
 endef
 TARGET_DEVICES += yiming-uz801v3
 
+define Device/generic-uf02
+  $(Device/msm8916)
+  DEVICE_VENDOR := Generic
+  DEVICE_MODEL := UF02 (250605 V0S)
+  FILESYSTEMS := squashfs
+  DEVICE_PACKAGES := configs-dongle wpad-basic-wolfssl rmtfs uci-usb-gadget \
+                     block-mount f2fs-tools prepare-rootfs-data \
+                     msm-firmware-dumper
+endef
+TARGET_DEVICES += generic-uf02
+
+
 define Device/generic-mf68e
   $(Device/msm8916)
   DEVICE_VENDOR := Generic
   DEVICE_MODEL := MF68E
   FILESYSTEMS := squashfs
   CMDLINE := "earlycon console=ttyMSM0,115200 quiet loglevel=0 vt.global_cursor_default=0 vt.cur_default=0 root=/dev/mmcblk0p14 rootfstype=squashfs rootwait nowatchdog"
-  DEVICE_PACKAGES := configs-mf68e wpad-basic-wolfssl rmtfs uci-usb-gadget \
+  DEVICE_PACKAGES := configs-mifi wpad-basic-wolfssl rmtfs uci-usb-gadget \
                      block-mount f2fs-tools prepare-rootfs-data \
                      msm-firmware-dumper kmod-fbtft-gc9107 router-display
 endef
 TARGET_DEVICES += generic-mf68e
 
+define Device/generic-m9s
+  $(Device/msm8916)
+  DEVICE_VENDOR := Generic
+  DEVICE_MODEL := M9S
+  FILESYSTEMS := squashfs
+  DEVICE_PACKAGES := configs-mifi wpad-basic-wolfssl rmtfs uci-usb-gadget \
+                     block-mount f2fs-tools prepare-rootfs-data \
+                     msm-firmware-dumper
+endef
+TARGET_DEVICES += generic-m9s
+
 endif

msm89xx/patches-6.12/801-arm64-dts-qcom-add-devices-makefile.patch

@@ -11,11 +11,13 @@ Signed-off-by: hkfuertes <hkfuertes@example.com>
 
 --- a/arch/arm64/boot/dts/qcom/Makefile
 +++ b/arch/arm64/boot/dts/qcom/Makefile
-@@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsu
+@@ -23,6 +23,9 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsu
  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-gt58.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-j3ltetw.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-j5.dtb
 +dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-generic-mf68e.dtb
++dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-generic-uf02.dtb
++dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-generic-m9s.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-j5x.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-rossa.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-serranove.dtb

msm89xx/patches-6.12/804-arm64-dts-qcom-add-msm8916-generic-uf2.patch

@@ -0,0 +1,42 @@
+--- /dev/null
++++ b/arch/arm64/boot/dts/qcom/msm8916-generic-uf02.dts
+@@ -0,0 +1,39 @@
++// SPDX-License-Identifier: GPL-2.0-only
++
++/dts-v1/;
++
++#include "msm8916-ufi.dtsi"
++
++#include <dt-bindings/leds/common.h>
++
++/ {
++	model = "UF02 4G Modem Stick";
++	compatible = "uf02,250605v0s", "qcom,msm8916";
++};
++
++&button_restart {
++	gpios = <&tlmm 23 GPIO_ACTIVE_LOW>;
++};
++
++&led_r {
++	gpios = <&tlmm 72 GPIO_ACTIVE_HIGH>;
++};
++
++&led_g {
++	function = LED_FUNCTION_WAN;
++	gpios = <&tlmm 71 GPIO_ACTIVE_HIGH>;
++};
++
++&led_b {
++	function = LED_FUNCTION_WLAN;
++	gpios = <&tlmm 73 GPIO_ACTIVE_HIGH>;
++};
++
++&button_default {
++	pins = "gpio23";
++	bias-pull-up;
++};
++
++&gpio_leds_default {
++	pins = "gpio71", "gpio72", "gpio73";
++};

msm89xx/patches-6.12/805-arm64-dts-qcom-add-msm8916-generic-m9s.patch

@@ -0,0 +1,134 @@
+--- /dev/null
++++ b/arch/arm64/boot/dts/qcom/msm8916-generic-m9s.dts
+@@ -0,0 +1,131 @@
++// SPDX-License-Identifier: GPL-2.0-only
++
++/dts-v1/;
++
++#include "msm8916-ufi.dtsi"
++
++#include <dt-bindings/leds/common.h>
++
++/ {
++	model = "M9S 4G LTE Mobile WiFi Router";
++	compatible = "generic,m9s", "qcom,msm8916";
++
++	bat: battery {
++		compatible = "simple-battery";
++		voltage-min-design-microvolt = <3400000>;
++		voltage-max-design-microvolt = <4400000>;
++		energy-full-design-microwatt-hours = <11100000>;
++		charge-full-design-microamp-hours = <3000000>;
++
++		ocv-capacity-celsius = <25>;
++		ocv-capacity-table-0 = <4330000 100>, <4265000 95>,
++			<4208000 90>, <4154000 85>, <4102000 80>,
++			<4063000 75>, <4006000 70>, <3972000 65>,
++			<3931000 60>, <3880000 55>, <3841000 50>,
++			<3817000 45>, <3798000 40>, <3783000 35>,
++			<3767000 30>, <3747000 25>, <3729000 20>,
++			<3700000 16>, <3687000 13>, <3683000 11>,
++			<3681000 10>, <3680000 9>, <3678000 8>,
++			<3674000 7>, <3666000 6>, <3641000 5>,
++			<3597000 4>, <3537000 3>, <3457000 2>,
++			<3336000 1>, <3000000 0>;
++	};
++
++	usb_id: usb-id {
++		compatible = "linux,extcon-usb-gpio";
++		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&usb_id_default>;
++	};
++
++	leds-extra {
++		compatible = "gpio-leds";
++
++		led-wlan-red {
++			function = LED_FUNCTION_WLAN;
++			color = <LED_COLOR_ID_RED>;
++			gpios = <&tlmm 84 GPIO_ACTIVE_HIGH>;
++		};
++
++		led-wan-green {
++			function = LED_FUNCTION_WAN;
++			color = <LED_COLOR_ID_GREEN>;
++			gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
++		};
++
++		led-battery-green {
++			function = LED_FUNCTION_CHARGING;
++			color = <LED_COLOR_ID_GREEN>;
++			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
++			default-state = "on";
++		};
++	};
++};
++
++&usb {
++	extcon = <&usb_id>, <&usb_id>;
++};
++
++&usb_hs_phy {
++	extcon = <&usb_id>;
++};
++
++&button_restart {
++	gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
++};
++
++&led_r {
++	function = LED_FUNCTION_WAN;
++	color = <LED_COLOR_ID_RED>;
++	gpios = <&tlmm 72 GPIO_ACTIVE_HIGH>;
++};
++
++&led_g {
++	function = LED_FUNCTION_WLAN;
++	color = <LED_COLOR_ID_GREEN>;
++	gpios = <&tlmm 73 GPIO_ACTIVE_HIGH>;
++};
++
++&led_b {
++	function = LED_FUNCTION_CHARGING;
++	color = <LED_COLOR_ID_RED>;
++	gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
++};
++
++&pm8916_bms {
++	status = "okay";
++	monitored-battery = <&bat>;
++	power-supplies = <&pm8916_charger>;
++};
++
++&pm8916_charger {
++	status = "okay";
++	monitored-battery = <&bat>;
++	qcom,fast-charge-safe-current = <900000>;
++	qcom,fast-charge-safe-voltage = <4400000>;
++};
++
++&tlmm {
++	usb_id_default: usb-id-default-state {
++		pins = "gpio110";
++		function = "gpio";
++		drive-strength = <8>;
++		bias-pull-up;
++	};
++};
++
++&button_default {
++	pins = "gpio102";
++};
++
++&gpio_leds_default {
++	pins = "gpio0", "gpio1", "gpio72", "gpio73", "gpio84", "gpio85";
++};
++
++&pm8916_0 {
++	pon@800 {
++		watchdog {
++			status = "disabled";
++		};
++	};
++};

optional_battery_prompt

@@ -0,0 +1,172 @@
+Perfecto. Aquí tienes la **checklist definitiva** para solucionar esto por software en el futuro:[1][2][3]
+
+## Checklist: Simular batería presente por software
+
+### 1. **Información que necesito darte**
+
+Cuando quieras hacer esto en otro dispositivo, dame:[4][5]
+
+**A) El device tree completo del dispositivo** (archivo `.dts`)
+- Para identificar qué GPIOs y canales VADC están definidos
+
+**B) El device tree base de msm8916** (normalmente `msm8916-ufi.dtsi`)
+- Para ver qué tiene el PMIC configurado por defecto
+
+**C) Logs del kernel con batería vs sin batería**
+```bash
+dmesg | grep -E "pm8916|bms|vadc|bat"
+```
+
+**D) Estado actual de los sysfs relevantes**
+```bash
+ls -la /sys/class/power_supply/
+cat /sys/kernel/debug/iio/iio:device*/in_*_raw
+cat /sys/bus/spmi/devices/0-000*/name
+```
+
+### 2. **Preguntas clave que debes hacerme**
+
+Cuando tengas esa información, pregúntame:[2][3][1]
+
+**"¿Cómo simular batería presente en [nombre-dispositivo]?"**
+
+Y específicamente investigo:
+
+**a) Identificar el canal VADC de BAT_ID**[1]
+```
+¿Qué canal del PM8916 VADC lee el BAT_ID?
+```
+Normalmente es `VADC_LR_MUX2_BAT_ID` o similar.
+
+**b) Localizar GPIO asociado a BAT_ID**[3][2]
+```
+¿Hay algún GPIO del PMIC conectado a BAT_ID?
+```
+
+**c) Ver configuración actual del BMS**[1]
+```
+¿Qué propiedades tiene el nodo &pm8916_bms?
+```
+
+### 3. **Soluciones software que aplicaré**
+
+Según lo que encuentre, te daré una de estas soluciones:[2][3][1]
+
+#### Opción A: Desactivar lectura de BAT_ID en VADC
+
+```dts
+&pm8916_vadc {
+    /* Comentar/eliminar el canal BAT_ID */
+    /*
+    bat-id@12 {
+        reg = <VADC_LR_MUX2_BAT_ID>;
+        qcom,pre-scaling = <1 1>;
+        qcom,hw-settle-time = <200>;
+    };
+    */
+};
+```
+
+#### Opción B: Forzar GPIO en pull-down permanente
+
+```dts
+&pm8916_gpios {
+    bat_id_pulldown: bat-id-pulldown-state {
+        pins = "gpioX";  // X = número de GPIO
+        function = "normal";
+        input-disable;
+        output-low;
+        bias-pull-down;
+        power-source = <PM8916_GPIO_VPH>;
+    };
+};
+```
+
+#### Opción C: Modificar propiedades del BMS
+
+```dts
+&pm8916_bms {
+    status = "okay";
+    monitored-battery = <&bat>;
+    power-supplies = <&pm8916_charger>;
+    
+    /* Opciones para ignorar BAT_ID */
+    qcom,ignore-shutdown-soc;
+    qcom,force-bms-active-on-charger;
+    /delete-property/ io-channels;  // Elimina referencia a VADC
+};
+```
+
+#### Opción D: Simular resistencia con GPIO analog
+
+```dts
+&pm8916_gpios {
+    bat_id_sim: bat-id-simulation {
+        pins = "gpioX";
+        function = "normal";
+        qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>;  // 100kΩ equiv
+        bias-pull-down;
+    };
+};
+```
+
+### 4. **Archivos que necesito ver**
+
+Cuando me preguntes, adjunta estos archivos:[5][4]
+
+```bash
+# 1. DTS del dispositivo
+target/linux/msm89xx/dts/qcom/msm8916-generic-TUDEVICE.dts
+
+# 2. DTSI base si existe
+target/linux/msm89xx/dts/qcom/msm8916-ufi.dtsi
+
+# 3. Configuración del kernel (opcional pero útil)
+target/linux/msm89xx/config-*
+
+# 4. Output de debugfs con batería conectada
+cat /sys/kernel/debug/pm8916-adc/channels
+cat /sys/kernel/debug/gpio
+```
+
+### 5. **Comando diagnóstico rápido**
+
+Cuando no arranque sin batería, ejecuta esto (con UART/serial):[2][1]
+
+```bash
+# Durante boot, captura:
+dmesg | grep -i "bat\|bms\|vadc\|adc" > /tmp/boot_log.txt
+
+# Y también:
+cat /sys/bus/spmi/devices/*/name
+cat /proc/interrupts | grep pm8916
+```
+
+Y pásame ese log completo.
+
+### 6. **Resumen: ¿Qué te pregunto yo a ti?**
+
+Cuando tengas un dispositivo nuevo que no arranca sin batería:[3][1][2]
+
+> **"Tengo [dispositivo] con MSM8916/PM8916 que no arranca sin batería. Usa el mismo lk2nd que [otro dispositivo] que sí funciona sin batería. Te adjunto:**
+> - **DTS de ambos dispositivos** (el que funciona y el que no)
+> - **dmesg completo** del que no funciona (si arranca con batería)
+> - **Esquemático** si lo tengo
+>
+> **¿Cómo configuro el device tree para simular BAT_ID por software?**"
+
+Y con eso, busco las diferencias en VADC, GPIOs y configuración del BMS para darte el patch exacto.[4][5][3][1][2]
+
+[1](https://www.kernel.org/doc/Documentation/devicetree/bindings/power/supply/qcom,pm8916-bms-vm.yaml)
+[2](https://www.kernel.org/doc/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt)
+[3](https://docs.qualcomm.com/bundle/publicresource/topics/80-88500-4/20_GPIO_registers_configuration.html)
+[4](https://ppl-ai-file-upload.s3.amazonaws.com/web/direct-files/attachments/71119587/2cbba375-133e-46d7-b84a-35a4b519f137/802-arm64-dts-qcom-add-msm8916-generic-mf68e.patch)
+[5](https://ppl-ai-file-upload.s3.amazonaws.com/web/direct-files/attachments/71119587/bb25f50b-d1d3-4c22-921c-7e22b9b185a8/805-arm64-dts-qcom-add-msm8916-generic-m9s.patch)
+[6](https://docs.qualcomm.com/bundle/publicresource/topics/80-88500-1/7_Pin_control_driver.html)
+[7](https://www.kernel.org/doc/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml)
+[8](https://sbexr.rabexc.org/latest/sources/6d/8af0298da51217.html)
+[9](https://gitlab.com/cunidev/linux-msm8996/-/blob/v3.5-rc5/Documentation/gpio.txt)
+[10](https://docs.qualcomm.com/bundle/publicresource/topics/80-70017-4/pmic-developer-touchpoints.html)
+[11](https://hafnium.googlesource.com/hafnium/third_party/linux/+/refs/heads/master/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt)
+[12](https://docs.qualcomm.com/bundle/publicresource/topics/80-88500-4/19_Hardware_overview.html)
+[13](https://docs.qualcomm.com/bundle/publicresource/topics/80-70020-8/pcie.html)

packages/configs-dongle/Makefile

@@ -1,6 +1,6 @@
 include $(TOPDIR)/rules.mk
 
-PKG_NAME:=configs-uz801
+PKG_NAME:=configs-dongle
 PKG_VERSION:=1.0
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
@@ -10,13 +10,13 @@ include $(INCLUDE_DIR)/package.mk
 define Package/$(PKG_NAME)
   SECTION:=Utilities
   CATEGORY:=Utilities
-  TITLE:=Default Settings For uz801v3
-  DEPENDS:=+PACKAGE_luci:luci-proto-modemmanager
+  TITLE:=Default Settings For Dongles
+  DEPENDS:=+PACKAGE_luci:luci-proto-modemmanager +ledcontrol +kmod-button-hotplug +inotifywait
 endef
 
 # Optional description
 define Package/$(PKG_NAME)/description
-Tweaks and defaults for uz801v3, including cleanup of problematic APK feeds.
+Tweaks and defaults for Dongles, including cleanup of problematic APK feeds.
 endef
 
 define Build/Configure
@@ -32,6 +32,12 @@ define Package/$(PKG_NAME)/install
 
 	$(INSTALL_DIR) $(1)/root/
 	$(INSTALL_BIN) ./files/luci-app-tailscale*.apk $(1)/root/
+
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/ieee80211
+	$(INSTALL_DATA) ./files/hotplugs/99-wifi-led $(1)/etc/hotplug.d/ieee80211/
+	
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
+	$(INSTALL_DATA) ./files/hotplugs/99-modem-led $(1)/etc/hotplug.d/iface/
 endef
 
 define Package/$(PKG_NAME)/postinst

packages/configs-dongle/files/hotplugs/99-modem-led

@@ -4,11 +4,11 @@
 
 case "$ACTION:$INTERFACE" in
     ifup:modem)
-        ledcontrol wan on
+        ledcontrol green:wan on
         logger -t modem-led "Modem UP - Green LED ON"
         ;;
     ifdown:modem)
-        ledcontrol wan off
+        ledcontrol green:wan off
         logger -t modem-led "Modem DOWN - Green LED OFF"
         ;;
 esac

packages/configs-dongle/files/hotplugs/99-wifi-led

@@ -12,17 +12,17 @@ case "$ACTION" in
             sta_status=$(ip link show phy0-sta0 2>/dev/null | grep -c "state UP")
             
             if [ "$ap_status" -gt 0 ] || [ "$sta_status" -gt 0 ]; then
-                ledcontrol wlan on
+                ledcontrol blue:wlan on
                 logger -t wifi-led "phy0 interface UP, blue LED ON"
             else
-                ledcontrol wlan off
+                ledcontrol blue:wlan off
                 logger -t wifi-led "No phy0 interface UP, blue LED OFF"
             fi
         fi
         ;;
     remove)
         if [ "$DEVICENAME" = "phy0" ]; then
-            ledcontrol wlan off
+            ledcontrol blue:wlan off
             logger -t wifi-led "phy0 removed, blue LED OFF"
         fi
         ;;

packages/configs-mifi/Makefile

@@ -1,6 +1,6 @@
 include $(TOPDIR)/rules.mk
 
-PKG_NAME:=configs-mf68e
+PKG_NAME:=configs-mifi
 PKG_VERSION:=1.0
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
@@ -10,13 +10,13 @@ include $(INCLUDE_DIR)/package.mk
 define Package/$(PKG_NAME)
   SECTION:=Utilities
   CATEGORY:=Utilities
-  TITLE:=Default Settings For mf68e
-  DEPENDS:=+PACKAGE_luci:luci-proto-modemmanager
+  TITLE:=Default Settings For MiFis
+  DEPENDS:=+PACKAGE_luci:luci-proto-modemmanager +ledcontrol +kmod-button-hotplug
 endef
 
 # Optional description
 define Package/$(PKG_NAME)/description
-Tweaks and defaults for mf68e, including cleanup of problematic APK feeds and LuCI battery widget.
+Tweaks and defaults for MiFis, including cleanup of problematic APK feeds and LuCI battery widget.
 endef
 
 define Build/Prepare
@@ -55,6 +55,18 @@ define Package/$(PKG_NAME)/install
 
 	$(INSTALL_DIR) $(1)/usr/lib/lua/luci/view/admin_status/index
 	$(INSTALL_DATA) ./files/battery.htm $(1)/usr/lib/lua/luci/view/admin_status/index/20_battery.htm
+
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/ieee80211
+	$(INSTALL_DATA) ./files/hotplugs/99-wifi-led $(1)/etc/hotplug.d/ieee80211/
+	
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
+	$(INSTALL_DATA) ./files/hotplugs/99-modem-led $(1)/etc/hotplug.d/iface/
+
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/button
+	$(INSTALL_DATA) ./files/hotplugs/50-battery-show $(1)/etc/hotplug.d/button/
+
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) ./files/battery-monitor.init $(1)/etc/init.d/battery-monitor
 endef
 
 define Package/$(PKG_NAME)/postinst

packages/configs-mifi/files/battery-monitor.init

@@ -0,0 +1,185 @@
+#!/bin/sh /etc/rc.common
+# /etc/init.d/battery-monitor
+
+START=99
+STOP=01
+
+CHARGER_FILE="/sys/class/power_supply/pm8916-lbc-chgr/online"
+BMS_PATH="/sys/class/power_supply/pm8916-bms-vm"
+
+# Required LEDs
+LED_RED="red:charging"
+LED_GREEN="green:charging"
+
+# Check if required LEDs exist
+check_leds() {
+    local missing=""
+    
+    if [ ! -d "/sys/class/leds/$LED_RED" ]; then
+        missing="$missing $LED_RED"
+    fi
+    
+    if [ ! -d "/sys/class/leds/$LED_GREEN" ]; then
+        missing="$missing $LED_GREEN"
+    fi
+    
+    if [ -n "$missing" ]; then
+        logger -t battery-monitor "LEDs not found, service disabled:$missing"
+        return 1
+    fi
+    
+    return 0
+}
+
+get_capacity() {
+    local voltage=$(cat $BMS_PATH/voltage_now 2>/dev/null)
+    local vmax=$(cat $BMS_PATH/voltage_max_design 2>/dev/null)
+    local vmin=$(cat $BMS_PATH/voltage_min_design 2>/dev/null)
+    
+    if [ -n "$voltage" ] && [ -n "$vmax" ] && [ -n "$vmin" ]; then
+        awk -v v="$voltage" -v vmax="$vmax" -v vmin="$vmin" \
+            'BEGIN {pct = ((v - vmin) / (vmax - vmin)) * 100; 
+                    if (pct < 0) pct = 0; 
+                    if (pct > 100) pct = 100; 
+                    printf "%.0f", pct}'
+    else
+        echo "50"
+    fi
+}
+
+show_battery_temp() {
+    local capacity=$(get_capacity)
+    
+    # Clear both LEDs first
+    ledcontrol $LED_RED off 2>/dev/null
+    ledcontrol $LED_GREEN off 2>/dev/null
+    
+    # Show battery level with 2 states (button press)
+    if [ "$capacity" -lt 50 ]; then
+        # Low battery: solid red
+        ledcontrol $LED_RED on 2>/dev/null
+    else
+        # Good battery: solid green
+        ledcontrol $LED_GREEN on 2>/dev/null
+    fi
+    
+    logger -t battery-monitor "SIGUSR1: Showing ${capacity}%"
+    
+    sleep 2
+    
+    update_led
+}
+
+update_led() {
+    local charging=$(cat $CHARGER_FILE 2>/dev/null || echo 0)
+    
+    if [ "$charging" = "1" ]; then
+        local capacity=$(get_capacity)
+        
+        # Clear both LEDs first
+        ledcontrol $LED_RED off 2>/dev/null
+        ledcontrol $LED_GREEN off 2>/dev/null
+        
+        # 3 charging states
+        if [ "$capacity" -ge 95 ]; then
+            # Fully charged: solid green
+            ledcontrol $LED_GREEN on 2>/dev/null
+            logger -t battery-monitor "Charging complete: ${capacity}%"
+        elif [ "$capacity" -ge 50 ]; then
+            # Charging medium/high: blinking green
+            ledcontrol $LED_GREEN blink 2>/dev/null
+            logger -t battery-monitor "Charging: ${capacity}%"
+        else
+            # Charging low: blinking red
+            ledcontrol $LED_RED blink 2>/dev/null
+            logger -t battery-monitor "Charging low: ${capacity}%"
+        fi
+    else
+        # Not charging: turn off LEDs
+        ledcontrol $LED_RED off 2>/dev/null
+        ledcontrol $LED_GREEN off 2>/dev/null
+    fi
+}
+
+# Main monitoring loop (runs in background)
+monitor_loop() {
+    # Set up signal handler
+    trap 'show_battery_temp' USR1
+    
+    # Get initial state
+    local last_state=$(cat $CHARGER_FILE 2>/dev/null || echo 0)
+    update_led
+    
+    # Poll charger state
+    while true; do
+        local current_state=$(cat $CHARGER_FILE 2>/dev/null || echo 0)
+        
+        if [ "$current_state" != "$last_state" ]; then
+            logger -t battery-monitor "Charger state changed: $last_state -> $current_state"
+            last_state=$current_state
+            sleep 1
+            update_led
+        fi
+        
+        # Poll every 2 seconds
+        sleep 2
+    done
+}
+
+start() {
+    # Exit silently if LEDs don't exist
+    check_leds || return 0
+    
+    # Check if already running
+    if [ -f /var/run/battery-monitor.pid ] && kill -0 $(cat /var/run/battery-monitor.pid) 2>/dev/null; then
+        logger -t battery-monitor "Already running"
+        return 0
+    fi
+    
+    logger -t battery-monitor "Starting with LEDs: $LED_RED, $LED_GREEN"
+    
+    # Start monitoring loop in background
+    monitor_loop &
+    
+    echo $! > /var/run/battery-monitor.pid
+    logger -t battery-monitor "Service started (PID: $!)"
+}
+
+stop() {
+    if [ -f /var/run/battery-monitor.pid ]; then
+        local pid=$(cat /var/run/battery-monitor.pid)
+        
+        if kill -0 $pid 2>/dev/null; then
+            kill $pid 2>/dev/null
+            
+            # Wait for process to die
+            local timeout=5
+            while [ $timeout -gt 0 ] && kill -0 $pid 2>/dev/null; do
+                sleep 1
+                timeout=$((timeout - 1))
+            done
+            
+            # Force kill if still alive
+            kill -9 $pid 2>/dev/null
+            
+            logger -t battery-monitor "Service stopped (PID: $pid)"
+        fi
+        
+        rm -f /var/run/battery-monitor.pid
+    fi
+    
+    # Only try to control LEDs if they exist
+    if check_leds 2>/dev/null; then
+        ledcontrol $LED_GREEN off 2>/dev/null
+        ledcontrol $LED_RED blink 2>/dev/null
+        logger -t battery-monitor "Shutdown: Red LED blinking"
+    fi
+    
+    return 0
+}
+
+restart() {
+    stop
+    sleep 1
+    start
+}

packages/configs-mifi/files/hotplugs/50-battery-show

@@ -0,0 +1,14 @@
+#!/bin/sh
+# /etc/hotplug.d/button/50-battery-show
+
+[ "$BUTTON" = "power" ] || exit 0
+[ "$ACTION" = "pressed" ] || exit 0
+
+charging=$(cat /sys/class/power_supply/pm8916-lbc-chgr/online 2>/dev/null || echo 0)
+
+if [ "$charging" = "0" ]; then
+    [ -f /var/run/battery-monitor.pid ] && {
+        kill -USR1 $(cat /var/run/battery-monitor.pid) 2>/dev/null
+        logger -t button-battery "SIGUSR1 sent to battery-monitor"
+    }
+fi

packages/configs-mifi/files/hotplugs/99-modem-led

@@ -0,0 +1,16 @@
+#!/bin/sh
+# /etc/hotplug.d/iface/99-modem-led
+# Modem LED control based on interface status
+
+case "$ACTION:$INTERFACE" in
+    ifup:modem)
+        ledcontrol red:wan off 2>/dev/null || true
+        ledcontrol green:wan on 2>/dev/null || true
+        logger -t modem-led "Modem UP - Green LED ON"
+        ;;
+    ifdown:modem)
+        ledcontrol red:wan on 2>/dev/null || true
+        ledcontrol green:wan off 2>/dev/null || true
+        logger -t modem-led "Modem DOWN - Green LED OFF"
+        ;;
+esac

packages/configs-mifi/files/hotplugs/99-wifi-led

@@ -0,0 +1,32 @@
+#!/bin/sh
+# /etc/hotplug.d/ieee80211/99-wifi-led
+# WiFi LED control based on phy0 status
+
+case "$ACTION" in
+    add)
+        if [ "$DEVICENAME" = "phy0" ]; then
+            sleep 5
+            
+            # Check interface status
+            ap_status=$(ip link show phy0-ap0 2>/dev/null | grep -c "state UP")
+            sta_status=$(ip link show phy0-sta0 2>/dev/null | grep -c "state UP")
+            
+            if [ "$ap_status" -gt 0 ] || [ "$sta_status" -gt 0 ]; then
+                ledcontrol red:wlan on 2>/dev/null || true
+                ledcontrol green:wlan on 2>/dev/null || true
+                logger -t wifi-led "phy0 interface UP, blue LED ON"
+            else
+                ledcontrol red:wlan on 2>/dev/null || true
+                ledcontrol green:wlan off 2>/dev/null || true
+                logger -t wifi-led "No phy0 interface UP, blue LED OFF"
+            fi
+        fi
+        ;;
+    remove)
+        if [ "$DEVICENAME" = "phy0" ]; then
+            ledcontrol red:wlan off 2>/dev/null || true
+            ledcontrol green:wlan off 2>/dev/null || true
+            logger -t wifi-led "phy0 removed, blue LED OFF"
+        fi
+        ;;
+esac

packages/configs-mifi/files/rc.button.power

@@ -9,22 +9,9 @@
 lockfile="/tmp/toff.lock"
 delay=1
 
-maybe_notify_display_shutdown() {
-    . /lib/functions.sh
-    config_load system
-    config_get FIFO display fifo "/var/run/display.fifo"
-
-   	[ -p "$FIFO" ] && { 
-        echo "shutdown" > "$FIFO" 2>/dev/null; 
-        sleep 1; 
-    }
-}
-
 shutdown() {
     logger -t poweroff "Powering off..."
 
-    # maybe_notify_display_shutdown
-
     sync
     /sbin/poweroff
 }

packages/ledcontrol/Makefile

@@ -16,7 +16,7 @@ endef
 
 define Package/ledcontrol/description
   Simple utility to control device LEDs via sysfs
-  Usage: ledcontrol <color> <on|off|blink|blink_fast>
+  Usage: ledcontrol <color:function> <on|off|blink|blink_fast>
   Includes hotplug scripts for WiFi and modem LED management
 endef
 
@@ -24,14 +24,8 @@ define Build/Compile
 endef
 
 define Package/ledcontrol/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) ./files/ledcontrol $(1)/usr/sbin/
-	
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/ieee80211
-	$(INSTALL_DATA) ./files/99-wifi-led $(1)/etc/hotplug.d/ieee80211/
-	
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
-	$(INSTALL_DATA) ./files/99-modem-led $(1)/etc/hotplug.d/iface/
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_BIN) ./ledcontrol.sh $(1)/usr/bin/ledcontrol
 endef
 
 $(eval $(call BuildPackage,ledcontrol))

packages/ledcontrol/files/ledcontrol

@@ -1,87 +0,0 @@
-#!/bin/sh
-# LED Control Utility for OpenWrt
-# Usage: ledcontrol <color> <on|off|blink|blink_fast>
-
-set -e
-
-COLOR="$1"
-ACTION="$2"
-
-# LED base path
-LED_BASE="/sys/class/leds"
-
-# Find LED by color
-find_led() {
-    local color="$1"
-    local led_path
-    
-    # Search for LED containing the color in name
-    led_path=$(find "$LED_BASE" -maxdepth 1 -type l -iname "*:${color}:*" 2>/dev/null | head -n 1)
-    
-    if [ -z "$led_path" ]; then
-        # Try without colons
-        led_path=$(find "$LED_BASE" -maxdepth 1 -type l -iname "*${color}*" 2>/dev/null | head -n 1)
-    fi
-    
-    if [ -z "$led_path" ]; then
-        logger -t ledcontrol "LED color '$color' not found"
-        echo "[!] LED color '$color' not found" >&2
-        echo "[*] Available LEDs:" >&2
-        ls -1 "$LED_BASE" | sed 's/^/    /' >&2
-        return 1
-    fi
-    
-    echo "$led_path"
-}
-
-# Set LED state
-set_led() {
-    local led_path="$1"
-    local action="$2"
-    
-    case "$action" in
-        on)
-            echo none > "$led_path/trigger"
-            echo 1 > "$led_path/brightness"
-            ;;
-        off)
-            echo none > "$led_path/trigger"
-            echo 0 > "$led_path/brightness"
-            ;;
-        blink)
-            echo timer > "$led_path/trigger"
-            echo 500 > "$led_path/delay_on"
-            echo 500 > "$led_path/delay_off"
-            ;;
-        blink_fast)
-            echo timer > "$led_path/trigger"
-            echo 100 > "$led_path/delay_on"
-            echo 100 > "$led_path/delay_off"
-            ;;
-        *)
-            logger -t ledcontrol "Invalid action: $action"
-            echo "[!] Invalid action: $action" >&2
-            echo "[*] Valid actions: on, off, blink, blink_fast" >&2
-            return 1
-            ;;
-    esac
-}
-
-# Main
-if [ -z "$COLOR" ] || [ -z "$ACTION" ]; then
-    echo "Usage: ledcontrol <color> <on|off|blink|blink_fast>" >&2
-    echo "" >&2
-    echo "Available LEDs:" >&2
-    ls -1 "$LED_BASE" 2>/dev/null | sed 's/^/  /' >&2
-    exit 1
-fi
-
-LED_PATH=$(find_led "$COLOR") || exit 1
-LED_NAME=$(basename "$LED_PATH")
-
-if set_led "$LED_PATH" "$ACTION"; then
-    logger -t ledcontrol "LED '$LED_NAME' set to '$ACTION'"
-    echo "[+] LED '$COLOR' set to '$ACTION'"
-else
-    exit 1
-fi

packages/ledcontrol/ledcontrol.sh

@@ -0,0 +1,75 @@
+#!/bin/sh
+# LED Control Utility for OpenWrt
+# Usage: ledcontrol <color:function> <on|off|blink|blink_fast>
+# Examples:
+#   ledcontrol green:wan on
+#   ledcontrol blue:wlan blink
+#   ledcontrol red:charging off
+
+set -e
+
+# Parse arguments
+if [ $# -ne 2 ]; then
+    echo "Usage: ledcontrol <color:function> <on|off|blink|blink_fast>" >&2
+    echo "" >&2
+    echo "Examples:" >&2
+    echo "  ledcontrol green:wan on" >&2
+    echo "  ledcontrol blue:wlan blink" >&2
+    echo "  ledcontrol red:charging off" >&2
+    echo "" >&2
+    echo "Available LEDs:" >&2
+    ls -1 /sys/class/leds 2>/dev/null | grep -v "^mmc" | sed 's/^/  /' >&2
+    exit 1
+fi
+
+LED_NAME="$1"
+ACTION="$2"
+LED_PATH="/sys/class/leds/$LED_NAME"
+
+# Check if LED exists
+if [ ! -d "$LED_PATH" ]; then
+    echo "[!] LED '$LED_NAME' not found" >&2
+    echo "[*] Available LEDs:" >&2
+    ls -1 /sys/class/leds 2>/dev/null | grep -v "^mmc" | sed 's/^/    /' >&2
+    exit 1
+fi
+
+# Set LED state
+case "$ACTION" in
+    on)
+        echo none > "$LED_PATH/trigger" 2>/dev/null || true
+        echo 1 > "$LED_PATH/brightness"
+        ;;
+    off)
+        echo none > "$LED_PATH/trigger" 2>/dev/null || true
+        echo 0 > "$LED_PATH/brightness"
+        ;;
+    blink)
+        echo timer > "$LED_PATH/trigger" 2>/dev/null || {
+            echo "[!] Blink not supported, setting ON" >&2
+            echo 1 > "$LED_PATH/brightness"
+            exit 0
+        }
+        echo 500 > "$LED_PATH/delay_on" 2>/dev/null || true
+        echo 500 > "$LED_PATH/delay_off" 2>/dev/null || true
+        ;;
+    blink_fast)
+        echo timer > "$LED_PATH/trigger" 2>/dev/null || {
+            echo "[!] Blink not supported, setting ON" >&2
+            echo 1 > "$LED_PATH/brightness"
+            exit 0
+        }
+        echo 100 > "$LED_PATH/delay_on" 2>/dev/null || true
+        echo 100 > "$LED_PATH/delay_off" 2>/dev/null || true
+        ;;
+    *)
+        echo "[!] Invalid action: $ACTION" >&2
+        echo "[*] Valid actions: on, off, blink, blink_fast" >&2
+        exit 1
+        ;;
+esac
+
+logger -t ledcontrol "LED '$LED_NAME' set to '$ACTION'"
+
+# Only print to stdout if running interactively (not from a script/service)
+[ -t 1 ] && echo "[+] LED '$LED_NAME' set to '$ACTION'"

readme.md

@@ -30,7 +30,9 @@ OpenWrt Project is a Linux operating system targeting embedded devices. Instead
 | Device | OpenWrt Target | SoC | RAM | Storage | Display | Battery | Notes |
 |--------|----------------|-----|-----|---------|---------|---------|-------|
 | **UZ801v3** | `yiming-uz801v3` | MSM8916 | 384MB | 4GB | ❌ | ❌ | USB dongle form factor |
+| **UF02** | `generic-uf02` | MSM8916 | 384MB | 4GB | ❌ | ❌ | USB dongle form factor most likely with only asian bands. _(Can be somewhat changed via QPST and the `qcn` file from uz801)_ |
 | **MiFi M68E** | `generic-mf68e` | MSM8916 | 384MB | 4GB | ✅ GC9107 | ✅ | Portable hotspot with interactive display |
+| **MiFi M9S** | `generic-mf9s` | MSM8916 | 384MB | 4GB | ❌ (Leds) | ✅ | Portable hotspot|
 
 ## Features
 
@@ -114,7 +116,15 @@ make -j$(nproc)
 - **Fastboot mode**: Insert device while holding the button
 - **EDL mode**: Boot to fastboot first, then execute: `fastboot oem reboot-edl`
 
-#### MiFi M68E
+#### UF02
+- **Fastboot mode**: 
+  - From OEM: `adb reboot bootloader`.
+  - From OpenWrt: Enter `edl` and erase boot partition (`edl e boot`).
+- **EDL mode**:
+  - From OEM: `adb reboot bootloader`, flash `lk2nd` aboot. Reboot pressing the button.
+  - From OpenWrt: Insert device while holding the button.
+
+#### MiFi M68E or M9S
 - **Fastboot mode from OpenWrt**: Enter `edl` mode and erase boot partition (`edl e boot`). This will force bootloader.
 - **EDL mode**: 
   - From OEM: `adb reboot edl`