cleanup

diffconfig

@@ -11,6 +11,7 @@ CONFIG_MODEMMANAGER_WITH_MBIM=y
 CONFIG_MODEMMANAGER_WITH_NETIFD=y
 CONFIG_MODEMMANAGER_WITH_QMI=y
 CONFIG_MODEMMANAGER_WITH_QRTR=y
+CONFIG_PACKAGE_bash=y
 CONFIG_PACKAGE_cgi-io=y
 CONFIG_PACKAGE_coreutils=y
 CONFIG_PACKAGE_coreutils-dd=y
@@ -52,6 +53,7 @@ CONFIG_PACKAGE_libncurses=y
 CONFIG_PACKAGE_libpcre2=y
 CONFIG_PACKAGE_libqmi=y
 CONFIG_PACKAGE_libqrtr-glib=y
+CONFIG_PACKAGE_libreadline=y
 CONFIG_PACKAGE_luci=y
 CONFIG_PACKAGE_luci-app-firewall=y
 CONFIG_PACKAGE_luci-app-package-manager=y

diffconfig_tailscale

@@ -1,6 +1,7 @@
 CONFIG_TARGET_msm89xx=y
 CONFIG_TARGET_msm89xx_msm8916=y
 CONFIG_TARGET_msm89xx_msm8916_DEVICE_yiming-uz801v3=y
+# CONFIG_FEED_packages is not set
 CONFIG_LIBQMI_COLLECTION_BASIC=y
 CONFIG_LIBQMI_WITH_MBIM_QMUX=y
 CONFIG_LIBQMI_WITH_QRTR_GLIB=y
@@ -8,6 +9,7 @@ CONFIG_MODEMMANAGER_WITH_MBIM=y
 CONFIG_MODEMMANAGER_WITH_NETIFD=y
 CONFIG_MODEMMANAGER_WITH_QMI=y
 CONFIG_MODEMMANAGER_WITH_QRTR=y
+CONFIG_PACKAGE_bash=y
 CONFIG_PACKAGE_cgi-io=y
 CONFIG_PACKAGE_coreutils=y
 CONFIG_PACKAGE_coreutils-dd=y
@@ -49,6 +51,7 @@ CONFIG_PACKAGE_libncurses=y
 CONFIG_PACKAGE_libpcre2=y
 CONFIG_PACKAGE_libqmi=y
 CONFIG_PACKAGE_libqrtr-glib=y
+CONFIG_PACKAGE_libreadline=y
 CONFIG_PACKAGE_luci=y
 CONFIG_PACKAGE_luci-app-firewall=y
 CONFIG_PACKAGE_luci-app-package-manager=y
@@ -89,4 +92,3 @@ CONFIG_PACKAGE_wireguard-tools=y
 CONFIG_TARGET_ROOTFS_PARTSIZE=240
 # CONFIG_TARGET_ROOTFS_SQUASHFS is not set
 # CONFIG_PACKAGE_kmod-crypto-kpp is not set
-# CONFIG_PER_FEED_REPO is not set

msm89xx/base-files/etc/init.d/uim_selection

@@ -1,101 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-# This script tries to automatically configure UIM application for Qualcomm QMI
-# modems with more than one sim slot.
-
-# Adapted from pmOS:
-# https://gitlab.com/postmarketOS/pmaports/-/blob/master/modem/msm-modem/msm-modem-uim-selection.initd
-
-eend() { echo $@; }
-veinfo() { echo $@; }
-ewarn() { echo $@; }
-
-# Must run after rmtfs but before ModemManager
-START=30
-
-start() {
-	case "$(cat /sys/devices/soc0/machine)" in
-	APQ*)
-		eend 0 'Skipping SIM configuration on APQ SoC.'
-		return 0
-	esac
-
-	# libqmi must be present to use this script.
-	if ! [ -x "$(command -v qmicli)" ]
-	then
-		eend 1 'qmicli is not installed.'
-		return 1
-	fi
-
-	# Prepare a qmicli command with desired modem path.
-	# The modem may appear after some delay, wait for it.
-	count=0
-	while [ -z "$QMICLI_MODEM" ] && [ "$count" -lt "45" ]
-	do
-		# Check if legacy rpmsg exported device exists.
-		if [ -e "/dev/modem" ]
-		then
-			QMICLI_MODEM="qmicli --silent -d /dev/modem"
-			veinfo "Using /dev/modem"
-		# Check if the qmi device from wwan driver exists.
-		elif [ -e "/dev/wwan0qmi0" ]
-		then
-			# Using --device-open-qmi flag as we may have libqmi
-			# version that can't automatically detect the type yet.
-			QMICLI_MODEM="qmicli --silent -d /dev/wwan0qmi0 --device-open-qmi"
-			veinfo "Using /dev/wwan0qmi0"
-		# Check if QRTR is available for new devices.
-		elif qmicli --silent -pd qrtr://0 --uim-noop > /dev/null
-		then
-			QMICLI_MODEM="qmicli --silent -pd qrtr://0"
-			veinfo "Using qrtr://0"
-		fi
-		sleep 1
-		count=$((count+1))
-	done
-	veinfo "Waited $count seconds for modem device to appear"
-
-	if [ -z "$QMICLI_MODEM" ]
-	then
-		eend 2 'No modem available.'
-		return 2
-	fi
-
-	QMI_CARDS=$($QMICLI_MODEM --uim-get-card-status)
-
-	# Fail if all slots are empty but wait a bit for the sim to appear.
-	count=0
-	while ! printf "%s" "$QMI_CARDS" | grep -Fq "Card state: 'present'"
-	do
-		if [ "$count" -ge "$sim_wait_time" ]
-		then
-			eend 4 "No sim detected after $sim_wait_time seconds."
-			return 4
-		fi
-
-		sleep 1
-		count=$((count+1))
-		QMI_CARDS=$($QMICLI_MODEM --uim-get-card-status)
-	done
-	veinfo "Waited $count seconds for modem to come up"
-
-	# Clear the selected application in case the modem is in a bugged state
-	if ! printf "%s" "$QMI_CARDS" | grep -Fq "Primary GW:   session doesn't exist"
-	then
-		ewarn 'Application was already selected.'
-		$QMICLI_MODEM --uim-change-provisioning-session='activate=no,session-type=primary-gw-provisioning' > /dev/null
-        fi
-
-	# Extract first available slot number and AID for usim application
-	# on it. This should select proper slot out of two if only one UIM is
-	# present or select the first one if both slots have UIM's in them.
-	FIRST_PRESENT_SLOT=$(printf "%s" "$QMI_CARDS" | grep "Card state: 'present'" -m1 -B1 | head -n1 | cut -c7-7)
-	FIRST_PRESENT_AID=$(printf "%s" "$QMI_CARDS" | grep "usim (2)" -m1 -A3 | tail -n1 | awk '{print $1}')
-
-	veinfo "Selecting $FIRST_PRESENT_AID on slot $FIRST_PRESENT_SLOT"
-
-	# Finally send the new configuration to the modem.
-	$QMICLI_MODEM --uim-change-provisioning-session="slot=$FIRST_PRESENT_SLOT,activate=yes,session-type=primary-gw-provisioning,aid=$FIRST_PRESENT_AID" > /dev/null
-	eend $?
-}
-

msm89xx/base-files/etc/rc.button/power

@@ -1,10 +0,0 @@
-#!/bin/sh
-
-[ "${ACTION}" = "released" ] || exit 0
-
-if [ "$SEEN" -ge 3 ]
-then
-	exec /sbin/poweroff
-fi
-
-return 0