diff --git a/msm89xx/config-6.12 b/msm89xx/config-6.12
index b3de424..b27361b 100644
--- a/msm89xx/config-6.12
+++ b/msm89xx/config-6.12
@@ -35,6 +35,8 @@
 # CONFIG_DEVFREQ_GOV_POWERSAVE is not set
 # CONFIG_DEVFREQ_GOV_USERSPACE is not set
 # CONFIG_DEVFREQ_THERMAL is not set
+# CONFIG_DRM_MSM is not set
+# CONFIG_EC_ACER_ASPIRE1 is not set
 # CONFIG_EXPERT is not set
 # CONFIG_FIPS_SIGNATURE_SELFTEST is not set
 # CONFIG_FORTIFY_SOURCE is not set
@@ -69,6 +71,7 @@
 # CONFIG_KPSS_XCC is not set
 # CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
 # CONFIG_LEDS_TRIGGER_NETDEV is not set
+# CONFIG_LOGO is not set
 # CONFIG_LWTUNNEL_BPF is not set
 # CONFIG_MAILBOX_TEST is not set
 # CONFIG_MFD_HI6421_SPMI is not set
@@ -323,6 +326,8 @@ CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
 CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
 CONFIG_AUTOFS_FS=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GPIO=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_BATTERY_PM8916_BMS_VM=y
 CONFIG_BATTERY_PM8916_BMS=y
@@ -467,6 +472,14 @@ CONFIG_DMA_SHARED_BUFFER=y
 CONFIG_DMA_VIRTUAL_CHANNELS=y
 CONFIG_DMADEVICES=y
 CONFIG_DNOTIFY=y
+CONFIG_DRM_BRIDGE=y
+CONFIG_DRM_FBDEV_EMULATION=y
+CONFIG_DRM_FBDEV_OVERALLOC=100
+CONFIG_DRM_GEM_SHMEM_HELPER=y
+CONFIG_DRM_KMS_HELPER=y
+CONFIG_DRM_MIPI_DBI=y
+CONFIG_DRM_PANEL_SITRONIX_ST7735R=y
+CONFIG_DRM=y
 CONFIG_DST_CACHE=y
 CONFIG_DT_IDLE_GENPD=y
 CONFIG_DT_IDLE_STATES=y
@@ -484,7 +497,16 @@ CONFIG_EXTCON_USB_GPIO=y
 CONFIG_EXTCON=y
 CONFIG_FANOTIFY=y
 CONFIG_FAT_FS=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_IMAGEBLIT=y
 CONFIG_FB_CORE=y
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+CONFIG_FB=y
 CONFIG_FB=y
 CONFIG_FHANDLE=y
 CONFIG_FIX_EARLYCON_MEM=y
@@ -638,6 +660,7 @@ CONFIG_LOCK_SPIN_ON_OWNER=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO=n
 CONFIG_LOGO=y
 CONFIG_LRU_GEN_WALKS_MMU=y
 CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"
@@ -962,6 +985,7 @@ CONFIG_UTS_NS=y
 CONFIG_VDSO_GETRANDOM=y
 CONFIG_VFAT_FS=y
 CONFIG_VIDEO=y
+CONFIG_VIDEOMODE_HELPERS=y
 CONFIG_VIRTIO_ANCHOR=y
 CONFIG_VIRTIO=y
 CONFIG_VLAN_8021Q_GVRP=y
diff --git a/msm89xx/patches-6.12/802-arm64-dts-qcom-add-msm8916-generic-mf68e.patch b/msm89xx/patches-6.12/802-arm64-dts-qcom-add-msm8916-generic-mf68e.patch
index bb53fd5..27c8d10 100644
--- a/msm89xx/patches-6.12/802-arm64-dts-qcom-add-msm8916-generic-mf68e.patch
+++ b/msm89xx/patches-6.12/802-arm64-dts-qcom-add-msm8916-generic-mf68e.patch
@@ -1,15 +1,8 @@
-# From: hkfuertes <hkfuertes@example.com>
-# Date: Sat, 11 Oct 2025 15:45:00 +0200
-# Subject: [PATCH] arm64: dts: qcom: Add MF68E MiFi router
-# 
-# Add device tree for MF68E 4G LTE MiFi router based on MSM8916.
-# 
-# Signed-off-by: hkfuertes <hkfuertes@example.com>
 Index: linux-6.12.51/arch/arm64/boot/dts/qcom/msm8916-generic-mf68e.dts
 ===================================================================
 --- /dev/null
 +++ linux-6.12.51/arch/arm64/boot/dts/qcom/msm8916-generic-mf68e.dts
-@@ -0,0 +1,70 @@
+@@ -0,0 +1,104 @@
 +// SPDX-License-Identifier: GPL-2.0-only
 +
 +/dts-v1/;
@@ -48,6 +41,32 @@ Index: linux-6.12.51/arch/arm64/boot/dts/qcom/msm8916-generic-mf68e.dts
 +		pinctrl-names = "default";
 +		pinctrl-0 = <&usb_id_default>;
 +	};
++
++	backlight: backlight {
++		compatible = "gpio-backlight";
++		gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
++		default-on;
++	};
++};
++
++&blsp_spi5 {
++	status = "okay";
++
++	panel@0 {
++		compatible = "sitronix,st7735r";
++		reg = <0>;
++		spi-max-frequency = <32000000>;
++
++		reset-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
++		dc-gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
++		backlight = <&backlight>;
++
++		width = <128>;
++		height = <128>;
++
++		pinctrl-names = "default";
++		pinctrl-0 = <&panel_default>;
++	};
 +};
 +
 +&pm8916_bms {
@@ -73,10 +92,18 @@ Index: linux-6.12.51/arch/arm64/boot/dts/qcom/msm8916-generic-mf68e.dts
 +};
 +
 +&tlmm {
++	panel_default: panel-default-state {
++		pins = "gpio25", "gpio30", "gpio97";
++		function = "gpio";
++		drive-strength = <8>;
++		bias-disable;
++		output-high;
++	};
++
 +	usb_id_default: usb-id-default-state {
 +		pins = "gpio110";
 +		function = "gpio";
 +		drive-strength = <8>;
 +		bias-pull-up;
 +	};
-+};
\ No newline at end of file
++};